Questions & Answers for: pressure foot

Question about 3537 Mechanical Sewing Machine

1 Answer

...pressure foot on your machine. There is a screw on the left-hand side of the pressure shaft that holds the ankle (if your Necchi uses snap-on feet) on the shaft. Loosen this screw until the pressure ...

Ad

Question about Harmony 2039 Mechanical Sewing Machine

1 Answer

...pressure foot on sewing machine. where is pressure foot This is the foot that comes down and holds the fabric layers under the needle. There will be a pressure foot lever to raise and lower the ...

Ad

Question about 2007 Mechanical Sewing Machine

1 Answer

pressure foot holder - press the button to release the foota clip on foot with a little lever at the back of the pressure foot holder - lift the lever to release the foot If it is a clip on foot,

Question about 2007 Mechanical Sewing Machine

1 Answer

Pressure foot too high The pressure foot does not grip the fabric. A bit too high above the fabric. How can we get it to grip the fabric so we can get straight lines with the stiches? On the top of ...

Question about 2007 Mechanical Sewing Machine

1 Answer

...pressure foot on singer model 14s654 needles are hitting on the pressure foot, need to know how to move foot over Unscrew pressure foot and replace or use finer needles, and make sure they are not ...

Question about 2007 Mechanical Sewing Machine

1 Answer

...foot pressure on your machine. This regulates the amount of pressure the presser foot applies to the fabric and the feed dogs. If the pressure is too strong, it will tend to push the upper layers of ...

...the spring that applies the pressure becomes compressed and no longer applies pressure like it should. http://makeitsew.biz/presser-foot-pressure Sewing Machine Pressure Settings for Machine ...

...foot pressure? Depends on the make/model of your machine. Most machines do have a pressure adjustment for the presser foot. Sometimes it is explained in the owner's manual. Newer machines have a dial ...

...foot pressure adjustment. Most machines do. It sounds like the pressure on your machine is set to the minimal or it is malfunctioning. http://makeitsew.biz/presser-foot-pressure ...

...pressure foot will not go up the lifter lever The lifter lever on my hobblock 794 will not lift up the pressure foot. It still sews but cannot get the pressure foot to raise. screw on pressure foot ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Sewing Machines Experts

Cindy Wells

Level 3 Expert

6688 Answers

Brad Brown

Level 3 Expert

19187 Answers

SmartAviator
SmartAviator

Level 3 Expert

1124 Answers

Are you a Sewing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...