Questions & Answers for: press mark

...specifications for the unit? 1. Load the first system recovery disk into the CD-ROM drive 2. Press R for the recover console 3. Press Alt + D to bring up the command prompt* 4. at the

mark all, then press option again and delete, you will delete everything there... To delete multiple texts on the E71: 1. scroll to the first text you want to delete. 2. press 'Options' key and select

mark all, press option again, and you will see send marked or copy marked. Once you mark all from the options, you will be able to send all the pictures at one time. But if you do not see the mark all

mark > press left arrow, choose Defaults, hit check mark > press left arrow, choose Set Defaults, hit check mark > press left arrow, choose Use Factory, hit check mark. Hope this helps but if

...Mark. 3. Press the right arrow key until Size/Type then press Check Mark. 4. Press the right arrow key until Tray 1 then press Check Mark. 5. Press the right or left arrow key until Letter then press ...

...mark button. 3.Press the Up or Down arrow to scroll to I/O , then press the check mark button. 4.Press the Up or Down arrow to scroll to EIO 1, 2, or 3 (depending on which EIO slot is in), then press ...

...Mark. 3. Press the right arrow key until Size/Type then press Check Mark. 4. Press the right arrow key until Tray 1 then press Check Mark. 5. Press the right or left arrow key until Letter then press ...

...Setup then press 'check mark' Press > to select ALL FAXES then press 'check mark' Press > to select ERROR Correction press 'check mark' Press > to select ON or OFF press 'check mark' to ...

...to comma. To change it to the period, press MODE, then A (FLAGS), then scroll down to "51 Fraction mark." There should be check mark to the left. Press C (CHK) to uncheck it, then press ENTER

mark button. Press the EIO (1 or 2) Jetdirect Menu . Press the check mark button. Choose TCP/IP . Press the check mark button. Choose Configuration Method . Press the check mark button. Choose Manual