Hi, my Precor 9.21 treadmil was working fine, however all of a sudden it became unblanced, i stop it to see what the problem was and then it dropped from about 3 inch, and now there is no power, would
Question about Treadmill Precor C954 (Used)
...precor treadmill goes straight to the highest incline hi, Your treadmills motor controlling circuit have some problem. thats why you cant adjust its speed. its running at its high speed because its ...
Question about 932i Treadmill
...precor 932i treadmill? i have an E 2 message Typically on the Precor Treadmills if there are errors on the unit, you can press and hold the stop button for 3-5 seconds and it will go into the error ...
Precore 9.35 Error 5 My Precore 9.35 stops within a few seconds of running after attaching the security clip. Panel states Error 5. I can restart it manually but cannot attach the clip without ...
Precor 9.35 treadmill displays an Error 5 after attaching the safety clip and running for a few seconds, then stops. I can restart it manually but cannot attach the clip without returning to the error
Question about 9.21s Treadmill Display Console Board Control Panel
...treadmill? Precor Error 01, Memory, RAM, EEPROM Test Error Probable Cause This error message almost always indicate an upper PCA problem when they are consistently displayed. Failures causing this ...
precor error code 1 Precor Error 01, Memory, RAM, EEPROM Test Error Probable Cause This error message almost always indicate an upper PCA problem when they are consistently displayed. Failures causing
Question about C956i Treadmills with HR / WholeSale
precor 956i won't turn on. It was just working. I unplugged it to re-arrange power cord and now it won't power up. see the video attached. God bless you
precor treadmill code e3 is on Precor Error 03, Memory, RAM, EEPROM Test Error Probable Cause This error message almost always indicates an upper PCA problem when it is consistently displayed. ...
...precor treadmill C932/C964 I receive a ERROR 05 and the treadmill is not working.,What is an ERROR 05 Code? Precor Error 05, Key Depressed at Power Up Probable Cause 1. A key is permanently depressed ...
Usually answered in minutes!
346 Questions
191 Questions
188 Questions
214 Questions
122 Questions