Questions & Answers for: precor 966i turn

Precor 9.25i treadmill will not turn on at on/off switch. It throws a spark then immediatly turns off When turning on at on/off switch, it throws a spark inside behind the power switch and flips off. ...

Precor C966i The unit turns off at random intervals. When reset it comes back on then shuts off a few minutes later. Error log is empty so not an error with software. Error log is empty. Unit simply ...

precor c966i error 20 Precor Error Code 20 Error Code: 20 Manufacturer: Precor Model: All Models Error Description: Error 20, Too many Maximum Power Requests in 1 Second - The error 20 observes a ...

...turn the speed sensor target. If both measurements are not seen, the speed sensor needs replaced. Some units have the speed sensor mounted on the lower PCA and the lower PCA needs replaced. Determine ...

...turn the speed sensor target. If both measurements are not seen, the speed sensor needs replaced. Some units have the speed sensor mounted on the lower PCA and the lower PCA needs replaced. Determine ...

...turn, replace the lower PCA. Check the amp draw using a clamp on AC volt-amp meter during loaded and no load conditions; compare the values to a similar treadmill that is known to have a good running ...