...preamp to my NAD integrated amplifier. OOps - now the CD player doesn't work through the CD input - but works at full blast through the Main input (PreampOut/Main In) have i gone and short-circuited ...
preamp gain pot does nothing to boost the input. How difficult is it to replace either an individual channel strip or the mic preamp? Unfortunately, the way the mic preamp and gain control are surface
...preamp, but i used the amp input for that and even when i disconnect this completely the inputs still won't work. however, the phono preamp will allow me to listen to my turntable through my speakers ...
...in your area they probably stock one. Plug the turntable to the preamp input, connect the preamp output to the receiver and that's it. You'll also need an AC outlet nearby as the preamp needs
...need some sort of preamp. It's not an impedance issue. Older receivers had a built-in preamp for the phono input. Newer receivers do not because most newer turntables have the preamp built into
...input, so you need to get an external phono preamp. Plug the turntable outputs into the phono preamp inputs, then plug the phono preamp outputs into one of the audio inputs on the HK, like where you ...
Question about AVR 745 Receiver
...input, because the preamp of the receiver or ampifier will be overdriven. The task of a preamp is to amplify the very low level of magnetic cartriges to the high level needed to work a line input and ...
Question about AVR 745 Receiver
...preamp, any analog input should work. The preamp is basically needed for inverse RIAA equalization. LPs are equalized in order to keep the record grooves smaller, for longer playing time, Bass ...
Question about AVR 745 Receiver
...input source on the preamp. Sometimes, if the incorrect input is selected, it may seem like the preamp is not working. Inspect Cables and Connections: Make sure that all cables (audio, video, power) ...
Usually answered in minutes!
6,442 Questions
5,455 Questions
4,073 Questions
2,449 Questions
2,268 Questions
