Questions & Answers for: Sharp Aquos no power to my tv

Question about Aquos LC-42D62U 42 in. LCD HDTV

5 Answers

TV's power mains from power outlet. 4. Insert the USB stick into USB port of your TV. 5. Connect TV mains to the outlet. 6. Wait until power LED on TV's panel starts and stops blinking red-blue (about

Ad

Question about AQUOS LC-40C32U 32 in. LCD TV

2 Answers

...TV's power supply is bad. it cannot produce the proper voltage to power your TV. thats why its on standby. Bring it to your dealer for proper advice on the status of your TV. Im Tanzanian i have the ...

Ad

Question about Aquos LC-46D62U 46 in. LCD HDTV

1 Answer

...tv turn,not POWER and OPC flashes again,push the power switch agian and wait.Have to do this like 3 or 4 times sometimes,than the tv backlight will come on,tv will work.Don't know but,if u require to ...

Question about Aquos LC-37G4U 37 in. HD-Ready LCD Television

1 Answer

...TV power back on. Any suggestions ? No life, lights of any signs of power when I switched outlets ? Thank you. Jack Biggane Hi, Question heading shows it is Sharp LC-37G4U tv and if power indicator ...

Question about Aquos LC-42D62U 42 in. LCD HDTV

1 Answer

...Tv have Power and OPC LED lights flashes?Yes.Tries tv unplug,replug it back like about an hour later.The tv should be working again.This problems happen to Sharp tv alots,later on,should it happen ...

Question about Aquos LC-46D62U 46 in. LCD HDTV

2 Answers

...tv power is normally turned on/off) This problems is very common on Sharp tv after a year or two.I have one too 46" Aquos.The tv Tuner signal board have problems,but this tv still usable.My tv does ...

Question about AQUOS LC-42D85U 42 in. LCD TV

1 Answer

tv power LED light incation all or power LED light indication an OPC LED lights indication flashing togethers?Tries tv unplug,replug it back like about an hour later,for the tv to do a whole resetting

Question about Aquos LC-52SE94U 52 in. LCD HDTV

1 Answer

tv power button back on and it works fine for like 5 min then shuts off again with the green lights blinking. The tv main logic board known as a tv Tuner signal board it is the causes and the problems

TV POWER on the remote control to turn the power on. IMPORTANT: IF THE UNIT DOES NOT POWER ON - UNPLUG THE AQUOS TELEVISION FROM THE OUTLET AND REPEAT THE INSTALLATION STEPS. IF YOU STILL ENCOUNTER NO

...TV power switch. Turning TV back on lights POWER LED and after about 6 seconds there is an audible click and LED starts blinking again. No HDMI or other inputs are connected This model was known for ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...