Questions & Answers for: Sylvania no power to my tv

...TV's power cable so it is not grounded to the house. Then press and hold the TV's own power button in for a minute. Plug the TV back in and see if it works. If it sill won't work, are there any ...

...tv would not power on.. opened up tv fuse was blown replaced fuse and every fuse put in throws a shock from outlet and tv will still not power on most likley the SMPS (switch mode power supply) has a ...

...power button on TV. Was hooked up to cable and did have cable send a refresh signal to the modem (?) earlier in the day because the internet was not working (the wireless router was not synched with ...

...TV’s power cord plug inserted all the way into the TV. Also, make sure the TV's cord is plugged into a good power outlet. You may want to plug something else into the power outlet to be sure the ...

...TV. Power on the TV to apply voltage data. Check the power supply output.5vdc for main board supply,12v for the sounds and 24vdc for back-light inverter. If any of the 3 supplies are missing or got a ...

...tv power supply board it is dying or already dead.The tv power LED light indication on the tv bazel frame just blinks and repeat?Yes.The tv power supply board it is the problems.That the board where ...

...tv replacement,tv have power supply board issues.That the board where the tv power a/c cord plug into it.Or not possible trade in for another new tv,call Sylvania for warrenty service tv repair

...power only led blink This TV Sylvania have all voltage of power supply ok , but no power on, only blink led green in front the tv. my tv was in ame condition i replace the board BA8AFOGO4017 and tv ...

...TV will power on and off. But you have flashing colors. Do this. With the original remote and TV on. Press the up cursor button, on the remote, followed with pressing the down cursor. Power off TV ...

...TV and the power outlet. Check to see if the cord is damaged or frayed in any way, which could prevent the TV from receiving power. Test the power inverter: You can test the power inverter using a ...