...Trim goes down only. First check the switch-- does it have power, then check the solenoid to see if it works-- there are two. One is for down, One is for up. If you get power from the solenoid-- ...
...Power Trim Motor are All Cables Tight If No Then The Trim Relay And Or Trim Switch Is Probably At Fault Step 3:,Remove Three Large Color Wires Going To Power Trim Motor Black, Blue And GreenConnect ...
Power trim stopped working Does the power trim have a fuse/reset breaker? no.Click the link below :----http://wikisolutions.blogspot.in/2012/02/get-free-answers.html
...BOTH WAYS.NEED TO KNOW WHAT THE POWER GOES THROUGH FROM THE THROTTLE SWITCH TO THE ENGINE AND THE TRIM MOTOR. there should be 2 trim relays. one for up theother for down. I would check there
power trim has stopped working on 2008 suzuki 4 stroke outboard Check fuse,trim button,loose wire,trim motor
Question about Outboard Motor Boat Bass Fishing Saltwater Base
...and suddenly I have no power at the helm, no trim, no ignition, no gauges, although the trim button on the motor works fine, checked the fuses,all good, battery is fine, any ideas? Brek in main ...
Question about Outboard Motor Boat Bass Fishing Saltwater Base
...all power to everything EXCEPT the power trim works.Any ideas Remove and clean all connections to all batteries , sounds like a bad ground,power trim wires are only thing getting a good connection
Question about Outboard Motor Boat Bass Fishing Saltwater Base
trim motor will not work on my 1998 sea ray 100 horse power boat CHECK YOU HAVE POWER TO THE MOTOR USING A TEST METER OR A BULB. If you have power to it remove it, strip it down and see if you can see
Question about Outboard Motor Boat Bass Fishing Saltwater Base
...power trim why does it not engage from shifter handel or on up down buttons on engine? Hi. Uncertain if you own a runabout or a larger boat but this might help. Because you have tried both control ...
Question about Outboard Motor Boat Bass Fishing Saltwater Base
...power source for the trim system. This would require some rewiring and installation work, and it may not be feasible depending on the configuration of your boat and engine. If you are not experienced ...
Usually answered in minutes!
413 Questions
78 Questions