Questions & Answers for: Hyundai Elantra power steering pump squealing

power steering pump--2001 hyundai elantra I found it thanks the power steering pump--2001 hyundai elantra My fluid is notleaking but we did siphon out some and added Lucas Power SteeringStop Leak it ...

Ad

...power steering pump but the car is still squealing and when i turn wheel awful please any ideas The belt isn't tensioned correctly. Spay some WD40 on the belt whilst engine is running. May cure ...

Ad

Question about 2001 Elantra

1 Answer

POWER STEERING SQUEEKS I HAVE A 2002 ELANTRA . EVERY TIME I TURN THE STEERING WHEEL ALL THE WAY IT SQUEEKS LIKE HELL AND THE POWER STEERING PUMP FREEZES. DO YOU GUYS HAVE AN IDEA OF WHAT IM DEALING ...

Question about Motor 2002 Elantra

1 Answer

...power steering pulley sticks and squeals. belts were recently replaced and are tight..fluid level is normal and there are no visible leaks. dear friend-if you remove the belt and turn the pump and it ...

...the power steering belt (worn out or just loose). The power steering belt is driven by the water pump pully which also drives the alternator - check both of them. Retention or replace as

...power steering pump got replaced. What could be wrong? The pully on the new power stirring pump stops when I turn the wheel. Any thoughts? Thanks, Bernie have you checked the idler arm? make sure the ...

...power steering pump pulley wheel binds up when steering is maxed out and makes loud squeling noise do ineed a new pump? and why is it doing it now after i changed the belts , i tried readjusting belt ...

Power steering belt squeals when first start.Have no power steering ,pump will stop when at full travel both whys.Have replaced belt twice will help for awhile.Belt very tight still does it.Have ...

Question about 2000 Elantra

1 Answer

...to turn. no squealing Two things. Your power steering pump is completely dry. Or the rack is bad. In the rack there is a seal in the middle that can blow, letting the fluid bypass, thus hard

...power steering drive pulley. A worn and dry belt may tend to squeal as the extra grip on that pulley is applied. You would have to pinpoint just where the squeal is coming from to be sure the power ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...