problem in power supply 1 i can check power cord 2 replace the power cord 3 i have 1320 hp ok plese help me you changed the cord or the power supply?
Question about LaserJet 1320 Printer
Laserjet 1320 shows undocumented light pattern, won't respond When I power up the printer it doesn't go into its initialisation routine - the toner light is off, the attention light in on, and the ...
...laserjet 1320 printer will not pick paper. just power on, make attempt to pick but not successful If this is happening from only one tray the rollers need to be replaced. If it is happening from all ...
...LaserJet 1320 lights I have a HP laser jet 1320. When power it initialize and then all the lights stays on except the toner light. I cannot print self test page. I had change all the main parts such ...
hp laserjet 1320 problem is ready go button and error led on secondery error is ready and go button on Hold both key and power on and continue hold for 20 second,then relise
laserjet 1320 has no power at all. I have an hp laserjet 1320 that has no power at all and keeps blowing fuses.Could this be the ECU? I've put in 2 fuses and it blows them right away.Is there a way to
hp laserjet 1320 is not powering there is SMPS power supply problem so u repair your SMPS power sypply
...laserjet printer is not powering, i open the printer and check the wiring and i see everything normal. try to check if they are properly fitted and did not see anything improper. Hello:Check the main ...
hp 1320 printer not showing any signal light (what is the problem) have you check the power source? if there is no light on the machine you have to bring out the power supply to test the fuses.
Question about LaserJet 1320 Printer
...LaserJet 1320 Printer. Initializes but why doesn't it print? the page orange light blinks continuously Power Reset here ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions