Questions & Answers for: no power getting through

...power input socket getting hot Packard Bell Easynote R 4650 hi, check if ur input socket is moving , i mean a bit loose. if so then u got problem with ur DC power jack of ur Laptop. u have to get it ...

Ad

getting power to board as light comes on but the monitor gets no signal tried reseating and cleaning everything then tested plug to pci slots to power video card with multimetre no power. where is the

Ad

...getting power but nothing is coming out then you have a bad coil. If its not getting power work your way back toward your battery testing as many points as you can until you get power. The point ...

Question about Aspire 5920-6727 Notebook

1 Answer

Acer Aspire 5920 will not power on at all. The Acer Aspire 5920 will not power on at all. The power cord is supplying adequate power, 19v. Had no problems, battery died and would never charge. New ...

Question about Aspire 5920-6727 Notebook

1 Answer

...getting power down and again it?s getting power by itself(even when monitor is getting power down CPU is working) Bro it occurred that your system hardware has experience a low power supply wattages ...

Question about DeskJet F380 All-In-One Printer

1 Answer

power is not comming into the printer No power to the printer. 1) Either the power adapter is not connected properly.Remove the power cord from main power outlet and connect it to any other electric ...

Question about (HP-P2507FWP) 250-Watt Power Supply

2 Answers

...power not getting .I get only 6.0 V If you mean you measured the power coming from the power supply was only 6 volts from the 12v lead.To be honest its really not worth your time and the parts cost ...

Question about eMachines Refurbished EMA SYSTEM BOARD MODEL T2984 eMachines (102257) PC Desktop

1 Answer

Fitted 1GB RAM yesterday, computer worked fine, today started okay, but later on it had turned the power off and will not power up now (emachne 32300 If you get no power, it sounds like possibly the ...

no power to the fuel pump..but when remove the negative terminal u get power to the pump when grounds off gets power to the pump,...when the grounds wire to the battery terminal is off u get power BUT

How to get different power levels? I press power, then 7 and only get 7 seconds...what else do I do? I want to do 7% power but it doesn't happen.....I press power, then 7 but what am I leaving out to ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Computers & Internet Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Computers & Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...