Questions & Answers for: Maytag Neptune power drain

...up where time is usually shown ND is no drain ...your drain pump may be clogged if clear check if the drain pump has power, and is not pumping it is either the pump or the pump or hose plugged

drain pump assembly. Remove power first! The pump is very easy to remove, ( unlocks from the base ) take the pump apart and check for foreign objects inside the pump assy. The power wires pull off and

...drain hoses for proper connection and kinks. Unplug unit and disconnect power. Check the electrical connections at the pump and make sure it is operational with no debris or blockage. Reconnect power ...

...noise, check the electrical connector going to the drain pump. If no power is getting through the connector, check the computer. If power is getting through to the drain pump, replace the drain

...drain motor and ensure it is not jammed by a foreign object such as a needle or a toothpick. It should be able to be turned by hand/finger- the power IS OFF! At this point it is also possible to test ...

...power to the drain valve/pump then the program controller unit is a suspect.Cleaning a pump:  http://www.youtube.com/watch?v=zKjKi50YBpI&NR=1&feature=fvwp Finally the washer must be ...

...power to the drain valve/pump then the program controller unit is a suspect. Cleaning a pump:  http://www.youtube.com/watch?v=zKjKi50YBpI&NR=1&feature=fvwp Finally the washer must be ...

...power to the drain valve/pump then the program controller unit is a suspect. Cleaning a pump: http://www.youtube.com/watch?v=zKjKi50YBpI&NR=1&feature=fvwp Finally the washer must be placed ...

...power to the drain valve/pump then the program controller unit is a suspect. Cleaning a pump: http://www.youtube.com/watch?v=zKjKi50YBpI&NR=1&feature=fvwp Finally the washer must be placed ...

...drain pump now power going to new drain pump everything else seems to be working fine You need to check the drain lines to make sure that they are clear. Don't forget to check the discharge line that ...