Questions & Answers for: Kenmore HE2 power drain

Ad

Question about HE2 Plus Front Load Washer

2 Answers

...the drain pump filter for foreign objects. 5. Plug in washer or reconnect power. 6. If the above does not correct the problem, go to step 7. 7. Unplug washer or disconnect power. 8. Replace the

Ad

Question about HE2 Plus Front Load Washer

1 Answer

...Drain hose plugged/kinked unplug washer/disconnect power check electrical connections to pump and make sure pump runs check drain pump filter for strings,sand etc plug in washer If this dont work ...

Ad

Question about HE2 Plus Front Load Washer

1 Answer

...power. 2. Check wire harness connections. 3. Check drain pump. 4. Check drain pump motor. 5. Check that the drain hose and drain pump filter are clear of foreign objects. 6. Plug in washer or ...

Question about HE2 Plus Front Load Washer

1 Answer

...power. 3. Check the drain pump filter for foreign objects, and also make sure the hose from the tub to the pump is not plugged or kinked. 4. Check the electrical connections at the pump and make sure ...

Question about HE2 Plus Front Load Washer

1 Answer

...power. 6. Check drain pump. 7. Check the pressure switch. 8. Verify CCU operation by running a Diagnostic Test or any cycle. Please do rate the solution if the issue is resolved or post a comment for ...

Question about HE2 Plus Front Load Washer

1 Answer

...drain pump filter for foreign objects. 5. Plug in washer or reconnect power. 6. If the above does not correct the problem, go to step 7. 7. Unplug washer or disconnect power. 8. Replace the ...

Question about HE2 Plus Front Load Washer

1 Answer

...power to the drain valve/pump then the program controller unit is a suspect. Finally the washer must be placed with a tilt- use a spirit level- so that all water will drain to the outlet port and ...

Question about HE2 Plus Front Load Washer

1 Answer

...power. Check the following: Is the drain hose kinked? Is the drain hose frozen? Is the drain hose clogged? Is the drain hose more than 96" (2.4 m) above the floor? Plug in washer or reconnect power. ...

Question about HE2 Plus Front Load Washer

1 Answer

...power. Check the following: Is the drain hose kinked? Is the drain hose frozen? Is the drain hose clogged? Is the drain hose more than 96" (2.4 m) above the floor? Plug in washer or reconnect power. ...

Question about HE2 Plus Front Load Washer

1 Answer

...power to the drain valve/pump then the program controller unit is a suspect.Cleaning a pump:  http://www.youtube.com/watch?v=zKjKi50YBpI&NR=1&feature=fvwp Finally the washer must be ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...