Questions & Answers for: Kenmore power drain Washing Machines

Question about Kenmore Dishwashers

1 Answer

...drain flapper that it connects to. Also check for bad wiring connections at the power junction box where the power hooks up to it under the dishwasher, i have seen the wire nuts either come loose or ...

Ad

Question about HE2 Plus Front Load Washer

1 Answer

...power. 2. Check wire harness connections. 3. Check drain pump. 4. Check drain pump motor. 5. Check that the drain hose and drain pump filter are clear of foreign objects. 6. Plug in washer or ...

Ad

Question about 4.5 cu. ft. Oasis Canyon Top Load Washer

1 Answer

...power off. Kept humming until unplugged. Hi Error code LD means long drain. This error appears when the washer takes more than 5 minutes to pump out the water till point where pressure switch resets. ...

Question about 4.5 cu. ft. Oasis Canyon Top Load Washer

1 Answer

...the drain pump filter for foreign objects. 5. Plug in washer or reconnect power. 6. If the above does not correct the problem, go to step 7. 7. Unplug washer or disconnect power. 8. Replace the

Question about HE2 Plus Front Load Washer

1 Answer

...power to the drain valve/pump then the program controller unit is a suspect. Finally the washer must be placed with a tilt- use a spirit level- so that all water will drain to the outlet port and ...

Question about HE2 Plus Front Load Washer

1 Answer

...power to the drain valve/pump then the program controller unit is a suspect.Cleaning a pump:  http://www.youtube.com/watch?v=zKjKi50YBpI&NR=1&feature=fvwp Finally the washer must be ...

Question about Front Load Washer

1 Answer

...power to the drain valve/pump then the program controller unit is a suspect. Cleaning a pump:  http://www.youtube.com/watch?v=zKjKi50YBpI&NR=1&feature=fvwp Finally the washer must be ...

...power to the drain valve/pump then the program controller unit is a suspect.Cleaning a pump:  http://www.youtube.com/watch?v=zKjKi50YBpI&NR=1&feature=fvwp Finally the washer must be ...

...power to the drain pump at the time of the drain cycle. You need to check the power on the drain pump at this time, if there is power then remove the drain pump and reset, if not the controller unit ...

...drain: Turn off the power for the dishwasher at the circuit breaker panel (usually labeled D/W). Check your air gap for partial clogging (and the resultant impaired draining of dirty dishwater). You ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...