Questions & Answers for: KitchenAid power cycling

stuck in two minute drain cycle symptoms: on power up the dishwasher goes into a 2 minute drain cycle displayed on front panel without any water in dishwasher, after two minute duration the dishwasher

...on control panel. I shut them off, and after a while they will go through cycle completley maybe a power surge. have it be the power coming into machines. let me know if this ...

...and filtering this water they save on heating energy and water consumption. The motors are not as powerful so they use less power even when running longer. Many machines will alternate the wash ...

...of the freezer. In older models, the timer runs continuously and roughly every six hours, cuts power to the cooling system and sends power to the defrost heater. In newer models the timer ...

..."option" buttons (a little green light next to an option button lights up), so electric power is there. Cut power at breaker for 5 minutes then cut back on. That will most likely reset ...

...setting. That machine uses very little water but does run longer to ensure that dishes are clean. Power usage is quite a bit higher. Try a short cycle

KitchenAid blinks rinse cycle Blinks rinse cycle and won't start or change cycles. I've turned off and on the power and reset it but still doesn't work any ideas how long was the power off for?

...dishwasher. Runs normal cycle with everything working. Next cycle will not start until cycle power at the circuit breaker. Then will run for one more cycle. Heating element ok - dries dishes ...

...dishwasher. The heating element is always on - even without any cycle selection. Even after a power cycle, the element is on immediately. Testing shows code 6-6. I initially thought it was the ...

...the machine washes good, rinses well & dries really good. Any & all help/ideas appreciated. Try a Power Reset. Before you go to bed, cut the power to it using the breaker, the plug, or isolation ...