Questions & Answers for: Haier power cycling

haier HLF11P won't start It turns on and has power. cycle lights illuminate. but when I hit start the cycle lights just flash, it doesn't start check the door switch ,also unplug it for a minute and ...

power draw on start up how much power in amps does the freezer draw upon starting the cool down cycle. When the compressor first starts up it can draw as high as 15 amps but for no more then a second ...

...OF DIFFERENT CYCLES BUT IT STILL WONT OPEN AT THE END OF THE CYCLE. HAVE TRIED TURNIG OFF THE POWER AND LEAVING IT A WHILE BUT STILL THE DOOR WONT OPEN. CANT SEEM TO FIND THE MODEL ON YOUR SITE ...

Will not turn on. Plugged into AC, no power when I turn on the power, no lights and no fan. If you're sure that the AC outlet in hot then it may be in defrost mode, in which case leave it plugged in ...

...the water out, i think it's the pump...what say you??? CHECK THE LID SWITCH, THAT CONTROLS THE POWER TO THE MACHINE DURING THE SPIN/DRAIN CYCLE, BROKEN LID SWITCH, NO POWER TO GO INTO SPIN AN IT ...

...the machine and defeat the interlock which is preventing the door opening from the inside.(REMOVE POWER

...out why the buzzer comes on at the end of the entire wash. When I plug it in to start it, the power button and other set lights come on. But I still must press the power and start buttons to ...

power available, but won,t start cycle power available, but cycle won't start I would start by checking the door handle micro-switch. If it cannot sense that the door is closed, the cycle will not ...

...and drain. The fault is. It won't agitate/ wash the clothes. What requires replacing? Hi, Try a power cycle before replacing any parts. You can also turn your dial counter clockwise and retest

My Haier 18 dishwashers control panel does not illuminate. I've tested power to the unit. I've turned off the plug power at the breaker for 30 min and I've simultaneously pressed cycle/wash as well as