...box by using another tv. tnx 4 using fixya, drcool swap the cables then (connect the known working connection from the other TV to the non working one). Try to reset the unit, unplug first the power ...
...box. 2) Press the POWER button for the cable box and then quickly press the MENU button. 3) This should bring up the user setting menu. Use the arrow keys on remote to go to Closed Caption and press ...
box, press "Power" then "Select" then "Menu", one right after the other. This accesses a secret menu on the Fios box. Using the arrow keys on the front of your Fios box, arrow down to "Additional HDMI
...tried different inputs (which is hard to do without a picture) and according to the "blue" box info at power-up, I should have had them, but in all cases, sound only. Any ideas? Inverter probably
...are using a box of some kind with this set, remove set and box from power for awhile and then power both back, sometimes a box can trigger this type of event, hope it helps and it cannot hurt to
Question about L32 32 in. LCD HDTV
take down a television. I have repaired TVs ( power surged) and always tell customers to have the service provider replace the TV box after a power surge. By all means replace the box and save your TV
...off if no signal is seen, a hint would be to if using a box or sat box remove whatever is connected from power and plug back, also confirm what input is being used--hook a DVD etc to see if it
Question about All-In-One CA24-A2 - Core i7 3610QM 2.3 GHz - 24" LED
...power box It might be possible to bypass the subwoofer/power box but you would be better off to replace the parts instead because it was designed to handle the setup it currently has. By bypassing it ...
Question about All-In-One CA24-A2 - Core i7 3610QM 2.3 GHz - 24" LED
...Power board, etc? If you wish to get some details; visit the site linked here. Pull up older posts. https://electronicshelponline.blogspot.com/ faults & possible causes to LCD & Plasma screen ...
Question about All-In-One CA24-A2 - Core i7 3610QM 2.3 GHz - 24" LED
...is supplying the signal, cable box, satellite box, Android box etc. Look for Mute on that remote, or cut the power to all your devices by removing the wall plugs. Wait 15 minutes and plug back in.
Usually answered in minutes!
1,646 Questions
482 Questions
435 Questions
431 Questions
403 Questions