Question about Pro Chain Saw 46cc 20"
poulan pro with tooless chain tightening - chain will not stay on I have a poulan pro 18" chainsaw. It has the tool-less chain tightening. I will try to adjust the bar to tighten the chain but the ...
...Pro 18'' chain saw 952-051338 952-04944417 Could be the correct nuts have been replaced with regular nuts. The original had a knurls on the nuts to hold in place. If they do not then you will have to ...
...pro at a saw dealer or cutting a bit slower if it is sharp, you know let the saw do the work. Be careful, the chain coming off can really ruin your day. If it came off at speed there are likely burrs ...
Question about Pro 42CC 2 Cycle Chainsaw, 18"
...tight. After a short period of use it loosens up and won't stay on the bar. Check threads on tension bolt may be worn or adjuster threads that bolt screws into may b worn. Odd thing is if bar ...
stay tight Between the chain bar and the body there is an adjusting screw, if the adjusting screw is stripped it will not pull on the chain bar to tighten the chain. procedure for
Usually answered in minutes!
1,998 Questions
1,006 Questions
778 Questions
1,057 Questions
700 Questions
