Questions & Answers for: Toyota Tacoma position light

...position. Interior light hot wire reds .3 volts. Interior light has feature to shut down after long "on time". Is shut down fixture a problem? Where is control? Thanks Some other ares to check should ...

Ad

light after an oil change on my 2009 Toyota Tacoma? 1. Turn the ignition key to the ?OFF? position with the odometer reading shown. (For details, see ?Odometer and two trip meters? on page 145 in this

Ad

...light comes on inside. bright's work most of the time. when this happens I can pull the switch towards the dim position and it works for a small amount of time. dimmer switch,combo

...light is still on. please advise what could be the problem You can try to reset the ecu, just switch the ignition into off position, disconnect the sensor cable at the fuel filter housing, turn the ...

1997 Toyota Tacoma pickup overheating + engine light comes on For many of the 90's and 2000's Toyota various models - Camry, Tacoma, 4 Runners, Corolla, and some other models it is usually caused by ...

Question about 2002 Tacoma

1 Answer

airbag light is burning constantly Hi, Your air bag was slided / moved a bit form its correct position giving you the light on. Please get it fixed at Dealer then. Regards, Jay

Question about 2006 Tacoma

2 Answers

light: 1) Turn your key to the on position (just before it turns the engine over). 2) Push the odometer button until the total miles are displayed and HOLD it in. 3) Turn the key Off, and then back ON

...be? The check engine light usually turn on for a few seconds when you put the switch in the ON position but suddenly the light stop coming on. Also I cant get any codes using the OBDII bulb burnt ...

no lights when switch is in first position no parking lights with switch in first position Do tail lights come on in that position? If yes-- the switch should be OK. This may sound strange but I have ...

light after engine oil replacement, turn ignition switch to OFF position with odometer showing ODOMETER READING. Turn ignition switch to ON position while holding down trip meter RESET button. 2. Hold

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...