Questions & Answers for: Mercury Cougar position light

...when the car is running, they are on with the DRL module, but if the dash switch is in the on position (running or headlight position), the car keeps running when the key is turned off. High ...

Ad

...light keeps coming on with an egr code. i have replaced the egr valve and the egr position sensor....any other ideas Disconnect the positive lead to the battery wait about 30 seconds and reconnect. ...

Ad

light not related. ---------------------------------------------------- The selector lever lock can be moved mechanically out of position ?P" when for example the battery is disconnected or completely

I need a diagram of stereo wiring to hook up a cd player Car Radio Battery Constant 12v+ Wire: Green/Yellow Car Radio Accessory Switched 12v+ Wire: Yellow/Black Car Radio Ground Wire: Black/Light ...

warning light stays on. how is this light reset? To reset the light, turn the key to position two and have the drivers door open for about 40 seconds, the light should automatically go off.. good luck

how to find out the radio wiring harness color codes on a 1997 mercury cougar hi 1997 Mercury Cougar Car Audio Wiring Diagram Car Radio Battery Constant 12v+ Wire: Black/Orange Car Radio Accessory ...

Question about 1995 Cougar

1 Answer

radio wiring diagram 1995 Mercury Cougar Car Stereo Wire Diagram Car Radio Battery Constant 12v+ Wire: Black/Orange Car Radio Accessory Switched 12v+ Wire: Yellow/Black Car Radio Ground Wire: ...

alternator tests good, but lights flicker dim, and wont charge battery I replaced the alternator on my 2000 cougar because it was not charging. the car is basically doing the same thing, and when you ...

hooked up cd player in 2002 mercury security stuck on car dont have any power going to it You cut into the worng wire i am sure, here are the wire functins for this car year, please redo the wiring ...

Question about 2000 Cougar

1 Answer

...Then out of the blue, the light goes off and runs just great where I switch gears at 2000 rpm? run fault codes and check for cam/crank position sensor/MAP/MAF sensors and accelerator position

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...