Questions & Answers for: polar machine

...PIECE TO A COUPLE BUCKS EACH. THE CAPACITORS HAVE A BOLD LINE RUNNING UP ON ONE SIDE INDICATING THE POLARITY. BOLD LINE SIDE IS "-" SIDE WITHOUT BOLD LINE ITS "+" THE POWER SUPPLY BOARD HAS THE ...

...when shorted internally, can be the problem. Only test for short. Must remove one lead, watch polarity. 6. You can only blow so many fuses before the real problem, which the fuse is protecting, ...

...as it has crashed. What's an inverter? Does it mean you have connected the power supply with wrong polarity? I dont think you need to open it. the model of your Toshiba not only locks out using ...

My Alesis Sr 16 was working fine a month ago, I pulled it out again, and it just wont turn on. The adapter works fine (I tried powering a guitar pedal with it). Is there a battery or some easy fix I ...

...is what they look like: http://www.capacitorlab.com/capacitor-types-electrolytic/radial-capacitor-polarity.jpg You will see what looks like a "K" marking on the back of the CAP - the ones in the ...

...there. Any help is appreciated Hi, Let's troubleshoot this one: 1) Make sure you have the right polarity for the wire you are using: Innershield wire (no gas) ground clamp must be on the + side. ...

...to properly connect the front panel plugs? (Power switch, power led, reset switch, HD activity led) Polarity does not matter with the power and reset switches. If power or drive activity LED's do ...

...Check Battery Orientation: Ensure that the batteries are inserted correctly with the correct polarity (+ and -). Sometimes, even if the batteries are new, they may not make proper contact if ...

Brother p touch 1005 new batteries inserted won't turn on Has not been used in a while but nothing, new batteries new tape, used the electric wire nothing Has not been used in a while but nothing, new