Questions & Answers for: Dyson poke

...has a cylindrical honeycombed/small holes(looks like hundreds? ) use a small pointed impliment to poke out all!!these holes as these are relative to vacuum within cylinder so if not clear ? motor

...attachment is installed. If hose was collapsing then the restriction was or is in the hose. Don't poke through hose with anyrhing but a rounded end broom stick or you chance tearing the hose. Take ...

I was vacuum with my Dyson DC 18 and I vacuum I rubber glove, and it is blocking the way to **** the durt, what can I do? There are several removable covers along the suction path of all Dysons. Have ...

dyson clogs at main intake Dyson clogs at main intake . Cleaned entire unit, it appears to work fine and within 15 minutes it is clogged again. check both of your filters they are probably clogged ...

see between the cyclones and then the tricky bit, with a 20cm/10" piece of thin-ish but rigid wire, poke down inside each cyclone unit and at the bottom of each is a small air inlet hole, these have a

...you can run a wire though the hose ( like a clothing hanger) do not push too hard or you will poke a hole in the hose. hope this works for

you have a clog in the hose ... you can use a mop handle or other long (not sharp) stick or wire to poke down the hose and push out what ever is in there .. be careful not to poke holes in the hose ..

help. Take the hoses off and give them a good shaking. or get a long piece of stiff wire and gently poke through the obstruction

I put the wand back inside of the tube and clicked the handle back onto the vacuum. Now the wand is poking down the bottom of the back of the vacuum. It's pushing down the black curved piece at ...

My DC31 just stopped working while I was vacuuming my wood floor. Is only 2 mths. old. I bought this for the versatility so I don't have to lug my big Dyson up and down my stairs. The battery was ...