2004 Blazer with SES light and read-out code of PO 128 We just hit a cold spell here in Austin now my SES lamp is on continuously and the diagnosis is that the coolant temp is too low however the ...
1998 chevy blazer reads codes po753 and po758, runs rough, can only run in 2nd and 3rd gear po 753 Shift solenoid A electrical problem po758Shift solenoid B electrical problem hope this helps
2002 chec blazer V6 4.3 Engine idles good. On accleration engine bogs down. Scan tool says Code 101- MAF/Vat. Will this cause that and where is the location of the MAF Along the duct from the air ...
PO 110, PO100, P1600, P0120, P0115 From CARMD I recieve the following codes: PO 110, PO100, P1600, P0120, P0115 Hi, P0115 is this - P0115
chevrolet blazer 2000 abs and break light keep poing on and have a code p0452 fuel presure sensor Hello , the abs code is prob just a maintainence light, prob is fine but GM likes to get you into the ...
...compartment but the radio shouldnt be under the hood i know i have a blazer 2001 blazer 4x4 codes PO-740 & PO-785 & P-1860 showing where are they located & what are
PO 101 should be your MAF sensor (Mass Air FLow) and something equally with 101pd. The sensor itself is probably located on or near the air duct between your filter to the engine throttle body. As for
i try to do my own work. I did the diagnostic test at Auto Zone and the two codes that came up were PO 171 and PO 174. The truck does not acclerate good and when I am driving between 30 and 40 mph, it
not firing, changed fuel filter and crankshaft position sensor Getting spark at distributor and getting plenty of fuel to the rail. Code reader gave po 335 for crankshaft position sensor so I changed ...
gm code po300 i get a code po 300 on my 2002 chevy blazer need to know what to check This is a misfire code. Start with the basics, fuel filter, spark plugs, vacuum leaks, wires etc. If after checking
Usually answered in minutes!
2,307 Questions
1,793 Questions
1,647 Questions
1,619 Questions
1,503 Questions