Questions & Answers for: plugs bathtub jets

bathtub water jets . is there a way to plug / close them bad smell and slime .i would rather not have them try using dish washer tablets in water they clean out tubes 3/4

My american standard jacuzzi tub is pluged in but jets won't turn on check for power at plug in if power your vacume switch is probably out replace switch. The jacuzzi is plug but is not working

I HAVE SIX JETS AND A CIRCULATOR, THEY ALL UNSCREW. DO THEY MAKE CAPS THAT I COULD JUST SCREW IN PLACE OF THE JETS AND HAVE A NOIRMAL TUB WITHOUT HOLES. OTHER THAN THE HOLES THE TUB IS OVAL AND SMOOTH

...bathtub jacuzzi wont work. I reset the circuit breakers but nothing. I filled the tub but nothing comes out of the jets make sure you have power to outlet that motor is plugged into,if so try pushing ...

...ideas no such items exist. use it like a jetted bathtub or pull it out and put in a soaker tub. Would someone please create this item! I wish I could remove my jets and put a flat-type plug as

bathtub plastics pipes underneath are leaking due to being chewed by rats. So if i fill up the tub to the jacuzzi line holes, water leakes through the chewed pipes on to the wood floor underneath. The

water coming out of adjustable air vent behind wall of tub one or more of the jets are turned off. i would suspect someone is plugging the jets off which causes water to go backwards in the system and

i have a marble jet bath tub. is there anyway to cap the jet holes, so it is no longer a jetted bath? Hello, You should be able to remove the access panel and just disconnect, and cap the hose that is

can you cap off an old jetted tub currently there are no solutions out there for plugging off the jets in a whirlpool tub.

...jets on our KOHLER bathtub Check the main breaker, check the GFCI that the pump is plugged into. Make sure you have power to the outlet that the pump is plugged into. if you have power to that point ...