Questions & Answers for: plastic fins

...bulb needs replacing, high above brake light at approx height of bottom of side widow. Remove plastic panel at interior rear corner, remove thin backing insulation and reach up with fingers ...

...plastic and the fins are breaking and the ice will not dispense. I would like to replace the auger with one with metal fins...or at least find a new auger...GE tells me I need to buy a whole new ice ...

plastic fins inside my frigidaire front loader are trapping soose coins and a key i need inside the hollow fins. I guess in the spin mode just enough space opens up to let them in? How do i remove the

..."fins" in the fridge part...we'll let you know if it works. The sensor is placed in a plastic sleeve that holds it to the fins. I have moved it so the tip of the sensor wire touches the end

...plastic fins of Whirlpool Duet Lint has built up inside the 3 plastic fins (baffles--?) inside the dryer. How do I remove the fins/baffles in order to clean them out? What is the model Number. Does ...

...plastic piece inside the dryer (about 18" long) came unscrewed and I can't figure out how to get the back off to get the screws that fell inside the bottom of the dryer. How do I do that? If you ...

...plastic fins that tend to break off. You will probably have to replace the hopper unit (The unit that the toner tube sits in) or in that unit where the tube opening sites you can either replace the ...

fins there is a white piese of plastic and in this plastic there is a probe this will adjust you temp. by slidding it up and down.but it hasen't been touched you may have a faulty probe.acesses to

...plastic fins inside the drum You pop the top and use a screwdriver to put the fins back. See the spring clip? Use a putty knife to release the top Then you can open the door and hold the fin inside ...

fins fell off tumbler on whirlpool gas dryer. can i use it with only 2 left you can still use it but the fins can be screwed in unless the plastic is broke