planetary housing fell off the vertical shaft has splines as does the housing .the part # is 9708036. ican not see any holes for a pin, no grove for a retaining pin, nor is there any threaded hole for
Question about KP26M1XMR Professional 600 Series 6-Quart Stand Mixer Meringue
...beater shaft falls off Beater Shaft Falls off The beater shaft on the 6 quart mixers is part of the planetary assembly. The planetary and center shaft are pressed together, and sometimes they will ...
Question about KT2651X Epicurean Stand Mixer
the planetary pan has dropped about 1/2" and I can see the gears. You need a new planetary. It's that simple, the new post 2002 design for the Epicurean the Accolaid, the Pro and Professional series ...
planetary dropped replaced planetary, worm follower gear, bevel gear. while using dough hook, planetary dropped. cannot get it to stay when you replaced the planetary you forgot to put the retaining ...
Question about KP26M1X Stand Mixer
the lip of the planetary ripped off and I am having a trouble replacing it for a Kitchen aid K5-A mixer the Lip of the planetary ripped off my old K5-A Kitchenaid mixer and the replacement part does ...
planetary assembly low and beater not locking On my KP26M1XOB, the planetary assembly now seems to have a noticeably larger gap above it. It's quite noisy. I checked the transmission and replaced the ...
Question about KP26M1X Stand Mixer
I have a older Hobart N50 mixer. I am trying to remove the planetary shaft. I removed the pin on the gear. How do you remove the shaft off of the gear to pull it out on the planetary side? After the ...
Question about KP26M1X Stand Mixer
Kitchenaid K5SS: Can't get planetary gear off using two screwdrivers as directed. What do you call the planetary gear? The planetary hub is held on by a pin thru the shaft that is driven out with a ...
Question about KP26M1X Stand Mixer
Any suggestions about how to remove a stubborn planetary from Hobart N 50? I have the Hobart N-50 Service manual and have removed the drip cup and driven out the taper pin. The planetary, even with ...
Usually answered in minutes!
493 Questions
357 Questions
324 Questions
285 Questions
205 Questions