Questions & Answers for: piston number 4

...piston numbering on a 4 cylinder mazda mx6 For years 1990-1998 4cyl (most vehicles) : looking at engine compartment from front of vehicle: Piston Numbering is -- 1 2 3 4 -- from left to right. Firing ...

Ad

number 4 piston on the kia serento, I need to change the fuel injector If it's a 4 cyl, number 4 is the rearmost (Away from the fan belt) If a 6, it's the second one on front side of the engine (going

Ad

trying to align the rotor on the distributor with the engine. which is the number 1 piston which is the number 1 piston on a 1999 nissan quest 4 cylinder? first from front or 1st from lft

...piston number (1-2-4-3) clockwise at distributor at the engine from right 1st piston =piston number one the engine from right second piston =piston number two the engine from right 3rd =piston number ...

Question about 1983 Civic

3 Answers

...62 thunderbird 1 5 4 2 6 3 7 8 Facing the engine.. left bank (Passenger side) from front to rear.. Pistons are numbered 1234 Drivers side front to rear Pistons are numbered 5678 Good luck! local

Question about 1983 Civic

1 Answer

where is number 1,2,3,4. piston on a vw beetle Number 1 piston is near to timing belt, and number 4 piston is near to flywheel & gearbox.

lincoln welder sa 200 continental f-163 firing order # 1 piston continental f-163 4 cyl firing order 1-3-4-2 whic is # 1 piston Number one is at the front of the engine on all four cylinders.

...piston number sequence Where is # 1 piston located &2 &3 &4 &5 &6 &7 &8 in count on engine block? Looking from front of engine in front of car? Looking from the front the closest cylinder to you is ...

Question about 1984 Bonneville

1 Answer

number 2...it could be warn or broken piston rings, number 3...it could be that one of the inlet or outlet valves could be bent or the valve seat are worn. I hope this has been some help,all the best

...a gap, say 12 thou on exhaust and 8 thou on inlet. Turn the engine until Piston 2 is at TDC, (both valves closed as with number 1) and adjust, keep going until all pistons have had the clearance

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...