Questions & Answers for: pinion seal

Ad

Question about 2004 F250

1 Answer

pinion seal leaking after making a 2000 mile trip pulling 11000lb.travel trailer I saw oil leaking from rear pinion seal.I can install the new seal but need toknow how tight to replace the pinion nut.

Ad

Question about 1990 Ranger SuperCab

1 Answer

pinion seal how do i replace the pinion seal on a 1990 ford ranger? remove the drive shaft at the pinion flange move it out of the way, then remove the pinion flange on the differential nose, the seal

Ad

...pinion seal. please do not forget to rate and comment about your experience with fixya. Before servicing the vehicle, please familiarize yourself with safety procedures. Remove both half shafts. Mark ...

...pinion seal out and it does mention how to get the axle loose. please do not forget to rate and comment about your experience with fixya today. Before servicing the vehicle, please familiarize ...

Question about 2001 Ram 1500 Truck 2WD

1 Answer

...pinion. Remove oil seal from axle housing. Installation 1. Ensure oil seal surface in axle housing is clean. Coat lip of oil seal with gear lube. Install oil seal using appropriate seal installer. ...

...pinion seal or the cover gasket. To replace the pinion seal, remove the driveshaft and let it hang ( it shouldn't come out of the tranny). Remove the pinion nut and the pinion yolk ( may have to ...

Question about 2006 Expedition

1 Answer

pinion seal at the front of the differential. Both are easy to replace. The pinion seal will require a little more labor than the differential cover plate. You will have to remove the drive line&

...Pinion Seal Replace on Dodge Dakota? http://howtobyme.blogspot.in/2012/04/pinion-seal-replace-on-dodge-dakota.html ----------- How to Replace a Rear Pinion Seal. ...

Question about 2006 Expedition

2 Answers

pinion seal. if you talking about pinion seal you need to safely raise support rear of vechicle using jack stands. you need to mark the drive shaft and companion flange for remember realignment during

...pinion seal on a 98 gmc sonoma remove the tail shaft . undo the pinion nut with a impact gun and pull the pinion off the shaft. Using a suitable tool pick the seal out of the housing. replace it with ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

Marvin
Marvin

Level 3 Expert

85160 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

john h

Level 3 Expert

22181 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...