Questions & Answers for: ping router

...ping the router's lan ip. From the router, I can also ping workstations on the lan. Any ideas? In the Cisco world, we overload the Ethernet port and Nat outside on the WAN port and Nat inside on the ...

...router. I can't ping it either. My laptop will ping things on our network. I reset the router to factory default but cannot ping the 192.168.1.1 ok connect the router to the system troug a ethernet ...

to FixYa, Pinging most LinkSys WRT54G would require to open a command prompt in the PC, type "ping 192.168.1.1" less the quotes and await reply from the router. Good luck and Thank you for using FixYa

...ping the router from the outside internet, the ping function is probably shut off. If you are trying to ping the router from a local pc either the pc is not connected to the router network or the ...

...ping the router and the second pc, however the second pc can not see the first pc 101 can not ping 100 but it can ping the router. Any idea's? If you have any Firewall installed in the PC which has ...

...router to see if the router lost connectivity. 2. Pinging an outside address will tell you if you have lost connectivity with the ISP or not. Ping test = Ping www.yahoo.com this is within the ...

ping to router from lan computers. 2. If there is no ping then check the cable b/w lan computers 7 router. 3.Else if there is ping to router, then check ur router for any ip blocks, access lists etc..

...- its the web browser not working ----3>ping an ip address (ping 98.137.149.56) **** if you find 4 replies its a DNS issue on wireless adapter else wireless router (W/L part) need to be ...

...ping your router with a packet length strength. To do the ping test, go to Start-Run and type CMD and hit enter. Then, in the Command Prompt Window type in the following ping 192.168.0.1 -l 30000 9 I ...

...ping data why?? Zoom 3G 4501 Router P THE router 4501 if the firmware version W1.0.6. is exit this problem why ? I test my wifi data which can connect but there no ping data but the version W1.0.10. ...