...Command prompt appears type in: ping 207.69.188.185. If you don't get a reply, the gateway is not installed. If there is a gateway already installed, check for any third party firewalls that may be ...
Question about WRT54GX2 Wireless-G Broadband Router with SRX200 (LS-WRT54G2)
problem. a blinking power light suggest that the device is already broken. Go to the command prompt and ping the roouter. If you can still ping it then i suggest to upgrade the firmware of your router
Command Prompt Type in "ping xxx" where 'xxx' is the IP of the PC acting as the server.You can get the IP Address for your computer: Click Start -> Settings -> Control Panel -> Network Double click on
Question about WRT300N Wireless Router
...command; "ping -t 192.168.1.1" under administrator. All I did was ping the wireless router. Let the result speak for themselves... ... Reply from 192.168.1.1: bytes=32 time=1358ms TTL=64 Reply from ...
Question about WRTP54G Wireless-G Broadband Router with 2 Phone Ports. (NETVOIPWLSWRTP54)
...respond. and when i tried it on internet explorer it says'' cannot find server'' i'v successfully pinged it using the command prompt, i pinged the ip address and it replied, i also pinged ...
...acsess might be disabled also try and ping the router with command prompt, if you can ping it then there might be a problem in your browser if you cant try it from a computer thats wired to the ...
...command prompt and do a ping to verify the connectivity. Example. ping 192.168.1.2 (The ip address should be the one of your dell machine. You can find it by running ipconfig in a command prompt on ...
...command prompt is opened type "ping 192.168.1.1 -t" in the black field. While it is pinging, press the reset button on the back of the valet and then check the command prompt while you're resetting ...
...command prompt 2. type ping www.microsoft.com and press Enter and see whats the packets sent, received and lost. if lost is 100% that means the router is not connected to the server and you need to ...
...> run type cmd. Execute the command ipconfig /all, see whether you get and IP or not. try to ping the gateway IP. Login to your router console and verify that you have configured the DNS
Usually answered in minutes!
952 Questions
299 Questions
248 Questions
219 Questions
206 Questions
