Questions & Answers for: piece together quilt

...I realize this must be a pretty basic question, but I am quite ignorant of the ways of sewing machines. I'm sewing just thin cotton pieces together for a quilt, Any suggestions would be

...piece of material to another but when I want to sew the layers of the quilt together the stitches won't stay or the thread that runs through the needle breaks. It has been several years since I have ...

question is a little vague... Put simply, here is how to make a quilt. Start by putting 2 pieces of material (good sides together) and sew a 1/4 inch seam. Keep on adding pieces until you have a quilt

the thread snaps when i sew accross a seam I am piecing and it works fine if i am assembling 2 pieces of fabric but if i am piecing the segments together (sewing accross seamed areas) the thread snaps

...piece the fabric and a walking foot if you are going to machine stitch the layers and batting together. This is a walking foot. Having a quarter inch foot is very handy to achieve perfect 1/4" seams ...

...TOGETHER INTO THE QUILT " WHERE CAN i GET hELP" CUT TRIANGLE' FROM mODA pATTERN "JUNGLE BUNGLE'" I CUT MY FRABIC INTO TRAINGLE AS WAS INSTRUCTED IN THE mODA pATTERN iT IS NOT GOING TOGETHER TO CREATE ...

...quilt tops as the foot features an accurate 1/4" and 1/8" on both sides of the needle. It also has a 1/4" guide in front and behind the needle to allow accurate 1/4" stops and starts from the end of ...

...together because it has an upper and lower front. It's a pattern for a vest that is in two pieces, an upper and lower piece, but just the front. Then you have to lay the cats on top of the vest, but ...

...piece of fabric and sew on it for a 1 minute do the same for every different stich do this for halve hour, by doing this your getting the different stiches in order and gear to ...

I have a problem when piecing quilts together.I measure to ensure all squares are identical.When I sew squares together there is "curving" that gets worse as I join rows/strips.What am I doing wrong? ...