Questions & Answers for: Panasonic pico fuses

Question about PT-51G44 51" Rear Projection Television

1 Answer

...pico fuses. the look like small like resistors. i have seen them all white, all yellow, & all green. if you find them they are usually marke in amps, so replace with the same amp pico fuse. good ...

Ad

Question about PT-53TW53 53" Rear Projection HDTV-Ready Television

1 Answer

...pico fuses and am unsure how to test them with a meter. And as far as following the the trace to the next solder joint, do you mean the next spot of solder on the trace? This may not be the most ...

Ad

Question about PT-65WX51 65" Rear Projection Television

1 Answer

pico fuses what do the pico fuses look like im not sure what im looking at the pico fuses look simular to resistors but are a solid color and has the value writen on it. the component location will ...

Question about PT-65WX51 65" Rear Projection Television

1 Answer

pico fuses are these situated on the power board or the board with the ircs on what does a capacitor look like a resistor look like how many pico fuses are there IDing components of electronics is ...

Question about PT-53WX53 53" Rear Projection HDTV-Ready Television

1 Answer

...it line up the blue still dose not want too work You need to check the area for pico fuses or low valued reistors. When the ICs go bad, they often will smoke the resistors or fuses that feed them. ...

Question about PT-53WX53 53" Rear Projection HDTV-Ready Television

1 Answer

panasonic pt53wx53g wheres pico fuse i was wondering if someone could tell me in relation on the board like r7011 u know to find the pico fuse thank u R7080 is mounted parallel with Transistor Q7060 ...

Question about PT-47X54 47" Rear Projection HDTV-Ready Television

1 Answer

...pico fuses. Its a fairly easy DIY job or you can call in a pro. If you want to do the repair yourself check the site www.TvRepairKits.com. Their kits include a photo instruction guide, original OEM ...

Question about PT-45LC12 45" Rear Projection HDTV-Ready Television

1 Answer

...is to repalce with a normal 5amp fuse. Just clip it out and solder the new one in. I would use a pico fuse. Or invest in a replacement thermal fuse from a part store. Part number K5C117BC0003. ...

...Pico fuses they also have ratings that are close to their location on the board. DO NOT go above the amp size it calls for. If the new one blows then you have a related short to that particular rail. ...

Question about PT-53WX42 53" Rear Projection Television

2 Answers

...resistors http://www.dannyg.com/examples/res2/resistor.htm Good Luck!!! All those resistors and a pico fuse around the convergence board,must used a Ohm meter test all of those resistors torlerance ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Panasonic Televison and Video Experts

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...