...pickup roller inside the printer. It is the large gray roller in the center, behind where the print cartridge was before it was removed. Figure 3: Locating the pickup roller WARNING: Avoid touching ...
...pickup roller) is moving freely (front and back), also check if tray 2 pickup roller is not able to rotate completely. If the tray 2 sensor is not moving freely and of the pickup roller is rotating ...
Question about LaserJet 3015 All-In-One Printer
...pickup roller. Figure 2: Removing the print cartridge, and locating roller Gently release the small, white tabs on each side of the pickup roller by pushing them away from the roller, and then rotate ...
Question about Business Inkjet 1000 - Printer - colour - ink-jet - Legal - 1200 dpi x 1200 dpi - up to 23 ppm (m...
...pickup roller is problematic. First clean, then replace if necessary. The part should be under $20. To replace (from HP Support): 1. Unplug the power cord from the printer, and allow the printer to ...
...pickup roller is worn or damaged. Replace the pickup roller. The tray 2 paper pickup assembly drive gears are damaged or the assembly is defective. Check the drive gears in the paper pickup drive ...
pickup roller does not turn. Hear clicking sound but roller doesn't turn to pickup and feed paper. Hi This is a problem with the Pickup roller. Try to inspect the paper pickup roller, on the right
...pickup roller. Under the paper pickup roller is a paper double-feed prevention pad. Take a "Q-Tip" dipped in alcohol and clean both the paper pickup roller and the double-feed prevention pad. That ...
Question about LaserJet P2015 Printer
...pickup roller (tray 1) Unplug the power cord from the printer, and allow the printer to cool. Press the print-cartridge-door button to open the print-cartridge door. Remove the print cartridge. After ...
pickup roller is the smaller roller, and the feed roller is the larger roller. 3 Pinch the tab on the end of the cassette pickup roller (callout 1), and pull the roller out. 4 Pinch the tab on the end
Question about Color LaserJet 4600n Printer
pickup/roller assembly on a Brother MFC-L8900cdw? Mine is starting to pull 2-3 sheets of paper at a time To replace the ADF pickup/roller assembly on a Brother MFC-L8900cdw printer, follow these steps
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions