Questions & Answers for: phone charger schematic

...charging is your problem, maybe i suggest to buy a new charger because some charger have different volts. try to buy a auto volts charger because some phone have a big capacity to charge their ...

...charger voltage 5V-7V,then check battery voltage that should be 3.7V approximate,then connect ur phone to charger it will be charging. What is the correct solution? Any body give the

charger output to remotely charge the batteries outside the phone. Do you have schematic for stand alone battery chargers, or other ideas? Thanks, Jerry you will have to search for it online at google

...phone charger is supposed not to be serviceable (you must not replace components). As this is a safety device, and even a bad solder joint can cause a serious hazard (fire, shock, phone blown). The ...

...charger that did it for me until the USB-like connector on the phone got broken. As an alternative, I was wondering if the tiny jack (1,5mm) connector next to USB would be a solution to my recharge ...

adapter therefore it has four wires Can i have a wiring diagram of the power adapter. No idea where you will get a schematic. BT 1000 BT 1500 Cordless Phone Power Supply 066773 for Main Base Charger..

...the battery and give a boost charge to the it using a ordinary power supply (Approximately 5V with a 1000mA current is sufficient). And turn on the phone by connecting the

charger was connected with 380 VAC input which exceed the U1 limit. So I found that the available SO8 IC on the PCB side is completely burned. The only characters were left: AS 12xx. Please I need the

...charger in, well can't see it and won't charge a phone cause it doesn't work. All fuses are testing good. Any suggestions? I know that the cigarette lighter receptacle doesn't work and there are no ...

...able to help you troubleshoot the issue or provide you with a replacement charger if necessary. Here is their contact information: Phone: 1-800-SAWDUST (1-800-729-3878) Email: ...