Questions & Answers for: Dodge Dynasty pen house

where is the ignition module located on 1990 Dodge Dynasty? This car does not have one but it does have a crank sensor!located on the top of the trans bell housing

need to know where waterpump at 1988 dodge dynasty cant see water pump Don't remember for sure but I believe its at the lower front corner of the engine, or, under the timing cover. (belt housing)

...firewall or front floorboard. It is plugged up with insects or road debris. Use a coat hanger or pen and dig in it for about a foot til it clears. The second problem was caused by the first, water ...

how do i time my 90 dodge dynasty. Do I just line how do i time my 90 dodge dynasty. Do I just line up all timing marks. I have removed the harmonic balancer and only the gear is there, with a dot. ...

How to remove 89 dodge dynasty 6 cyl starter? How many bolts need removing, funky bracket mounted to the top? Bracket on top is for rely. You need to remove the 2 screws on clinode, battery cable ( ...

I ran my battery down and recharged it but the car still won't start and won't go into park...how do I reboot the computer, I was told that might be the problem. remove the battery and put a fully ...

was running good would shut off but start back up. now no spark. have checked coil pack, thats good . what could it be? I had one of these before like this. I checked everything for spark and all ...

how do I get the cover off of the rear left blinker of a 1989 dodge dynasty so I can replace the bulb? In the trunk behind the housing pull back the carpet and there will be bolts that secure the ...

where is the location of the thermostat on a 91 dodge dynasty Follow the top radiator hose to the engine. The clamp is on the thermostat housing.

what do speed sensors actually look like? Hi Cole, The speed sensor is a cylindrical piece of equipment that fits onto a retaining housing usually behind the brake assembly on each wheel. They are ...