Questions & Answers for: Chevrolet Malibu pedal repair

...position sensor. Figure $240 or so at a dealer. I hate that issue.  You are not alone. 

pedal position sensor A curcuit malfunction. po172 is---system to rich (bank 1). po120 means that the tps is out of adjustment or it is bad. for po172 after you repair tps, it may be ok, if not change

...Pedal-Off-Tail-Lights-On-Repair-Guide/ You dont need to replace any switches! This same problem happened on my 2008 malibu. I also had problems with my cruise control and traction control circuits ...

...the stop lamp switch try setting it to its maximum adjustment Common issue with a GM bulletin. 

but I'm posting to save others some hassle as well.  This link will save you efforts:  http://www.paulstravelpictures.com/GM-Chevrolet-Malibu-Brake-Pedal-Off-Tail-Lights-On-Repair-Guide

...repair myself? Brake light comes on while driving. goes away when I press hard on pedal. when I top off master cylinder problem goes away for about a month. email me at [email protected] and I ...

My brake tail lights stay on while im driving and when i step on brake pedal they go off, and with in seconds they go back on agsain. I have a 200 chevy Malibu. ...

...this problem is due to a bad brake light switch, this switch is located under the dash on the brake pedal bracket, if you follow the brake pedal arm up you will see the switch, the arm is what ...

...what they want you to buy.  It's a well known issue with a bulletin out in GM. 

no brake peddle after changing passenger side brake pedal If you mean changing your brake pads, you may have a frozen pad in bracket therefore creating "no pedal" feel. If any hydraulic line or hose ...