Question about Driving Force Pro (963293) Wheel And Pedals Set
Driving Force? Pro pedal set problem PS2 The pedal set don't work anymore. Every connection seems ok. The steering keeps turning like if it don't recognize the pedal set with my PS2 How do you connect
Question about Desktop 720-T Desktop Cassette Transcriber / Recorder
...it will rewind. Sometimes out of the blue on my Philips 720, when I press play on either the foot pedal or manually on the machine, it will rewind. If I try to rewind or fast forward while I'm ...
Question about Desktop 720-T Desktop Cassette Transcriber / Recorder
...my machine on it starts running and foot control will not wok That problem sounds like a bad foot pedal. It's possible that the mechanism inside the pedal is stuck in the "on" position. The pedal ...
Stairmaster 4000pt pedals lose resistance during workout My stairmaster 4000pt works ok when not bearing full weight onto pedals but pedals drop abruptly when bearing full weight on pedals what could ...
Left pedal has no resistance right pedal is fine Why does one pedal drop on my Stairmaster Stepper but the other pedal operates correctly? Stairmaster Steppers, How to Troubleshoot when one Pedal ...
my right pedal on my 4600 cl goes right to ground i belive the bushing is bad on the leveling arm the left side pedal is good and i nice and tight on the shaft where the right side was loose do u ...
stairmaster 4000pt pedal slips I have a stairmaster 4000pt that the right side pedal slips occasionally and is getting worse. Is this the hub assembly going bad? Is it difficult to replace? Could it ...
Question about Confidence 7463 Computerized Sewing Machine
When plugging in the pedal, the machine beeps. However, it is unresponsive to the pedal otherwise. I can't get the machine to go. If I remove the pedal from the machine I am able to use the button for
Pedals stuck pedals are stuck at the top and won't move at all! My pedals on my Stairmaster are frozen in the top position, what do I check? Remove the alternator belt. IF pedals drop, problem is in ...
Question about 4600PT Stepper
...without the foot petal being used. Could the foot petal need to be replaced? Likely either the foot pedal is sticking and not fully extending to the off position, or the foot pedal has failed, or the ...
Usually answered in minutes!
27,926 Questions
21,069 Questions
11,924 Questions
9,005 Questions
5,602 Questions