Questions & Answers for: pedal assembly

Question about 1994 Cutlass Supreme

1 Answer

pedal assembly. You will see a metal cog that is holding the pedal assembly. Carefully, insert the screwdriver in to the cog assembly and carefully wiggle the blad tip. This should "trip" the assembly

Ad

...pedal assembly will not engage the e brake. I The pedal assembly will not engage the e brake. I can engage it by pulling the line under the truck but the pedal goes to the floor. no either the cable ...

Ad

...pedal assembly made of ABS plastic has a small lip holding clutch master cylinder. If the lip breaks, your clutch master cylinder assembly will shoot away from firewall & your clutch pedal will ...

pedal bracket assembly, under the instrument panel. The stop lamp switch attached to the mounting bracket. Disconnect the negative battery cable. Unplug the two brake switch wiring harness connectors.

Question about 1992 Lebaron

1 Answer

pedal assembly off a 1999 Silverado Chevy? Are there three or two bolts? What has happened is the cable broke or fell off the parking brake assembly. It will not come back up when you push it down and

...pedal assembly will have to be replaced. The assembly is only attached to the vehicle with 3 bolts. It can be a little tricky getting the main cable disconnected fronm the old pedal assembly and ...

Question about 4600PT Stepper

1 Answer

Pedals stuck pedals are stuck at the top and won't move at all! My pedals on my Stairmaster are frozen in the top position, what do I check? Remove the alternator belt. IF pedals drop, problem is in ...

...ACEELERATOR PEDAL POSITION SENSOR IS USUALLY BUILT INTO ACCELERATOR PEDAL ASSEMBLY .........LOOK FOR WIRES COMING OUT OF ACCELERSTOR PEDAL ASSEMBLY ON THE INSIDE OF CAR NEAR OR UNDER ACC PEDAL ...

...pedal assembly ! That's the whole gas pedal assembly , two bolts hold it fast to the fire wall . Search from over 10 Million Auto Parts P2138 APPS Accelerator Pedal Position Sensor Fix 3 5L Chevrolet ...

...Pedal Assembly: Identify the pedal assembly on the underside of the vacuum cleaner. It is usually connected to the height adjustment or other features. Release Tabs or Screws: Look for tabs or screws ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...