PEAVEY AMP 1400 I'M TRY TO HOOKUP A MIXER. I WAS JUST WONDERING LEFT AND RIGHT OUTPUTS ON PEAVEY AMP OR RED OR BLACK I DON'T WANT TO HOOK IT UP WRONG THANK YOU mixer 1/4 in jacks unblaced to power amp
Question about AMPLIFIER, 1000 WPC, DDT, 8/4/2 OHMS => Model PV2000 Car Audio Amplifier
...mixer. The Peavey A/B controls are output gain controls. Your mixers stereo output goes into the amps inputs, channels A & B. The Peavey is the output stage to your speaker system. If you you connect ...
Question about AMPLIFIER, 1000 WPC, DDT, 8/4/2 OHMS => Model PV2000 Car Audio Amplifier
...Peavey XR600-B mixer section Need schematic of mixer section of Peavey XR-600B, power amp section works fine using the power amp input. Signal injected into mixer channel and then monitor main output ...
...mixer to it ( i wanna use the peavey as an amp?? That's easily done. Simply connect the left(or right) output of your mixer to one of the channels on the peavey. Use any line input. Since the peavey ...
...mixer to a Peavey xr8600 with out going through the 8600's mixer? I am wanting to use the 8600 to power my mains and use another amp to power my monitors. can i do this? You CAN drive the power ...
Question about 16FX 16 Channel Mixer
...peavey 16fx mixer. if i trun it off on & on i get signal for 2 sec i have CD player sending music too line 3. i have the gain set at 5 , i have d main levels faders set at 6 , i came out with my ...
Question about Electronics Peavey PV10 Mixer
I want to know how to connect a powered subwoofer to the peavey 10 mixer Connection is hooking up from mixer's main outputs (L,R) to Subwoofer amp inputs.
...Peavey pv10 mixer. I'm going out of the outputs on the mixer to my amp. Then the outputs on the amp go's to my main speakers. I'm not sure where to add the powered sub. If you need more info let me ...
...and connect to a gemini dj mixer? Peavey XR 1212 You may find helpful info from the Peavey site. I'm not sure how you want to configure your setup, but the tape out may be able to feed the power
Question about Electronics Peavey PV14 Mixer
...mixer and amp I have a PV14 non powered mixer, a pyle pro 4100 amp and two non powered floor monitors. How do I connect the monitors to the mixer and amp? No knowledge of this stuff at all so please ...
Usually answered in minutes!
6,442 Questions
5,455 Questions
4,073 Questions
2,449 Questions
2,268 Questions