Questions & Answers for: Mercury Grand Marquis pcm

...Seems to get worse the longer I drive. A ford mechanic put it on an analyzer and said it was the PCM Control Module. He said that this part was no longer made and he didn't know where to get one. ...

Ad

Question about 2003 Grand Marquis

3 Answers

...that before replacing a suspect FPDM, fuel pump relay, inertia switch, fuel pump sending unit or PCM, the following things should be checked: Check for a loose PCM pin fit issue. Check for a loose ...

Ad

Question about 1999 Grand Marquis

1 Answer

...located on the side of the throttle body. The valve is controlled by a duty cycle signal from the PCM and allows air to bypass the throttle plate in order to maintain the proper idle speed. Do NOT ...

Question about 2004 Grand Marquis

1 Answer

...back to me. WELL SOUND LIKE ELECTRICAL PROBLEM NO DASH LIGHTS OR NO CHECK ENGINE LIGHT.CHECK THE PCM IGNITION FUSE.COULD HAVE LOOSE FUSE IN FUSE BOX TO THE IGNITION AND PCM ALSO LOOSE WIRE IN FUSE ...

Question about 1989 Grand Marquis

1 Answer

...harness fuel pump fuse is in fuel pump is protected by a relay. see owner manual for location. PCM power relay powers up PCM. PCM then powers up fuel pump through fuel pump relay. Also, check to ...

Question about 2003 Grand Marquis

1 Answer

where is the computer located/ You have to disengage the PCM (computer) wiring harness from the PCM as the PCM is removed from under the dash. The PCM connector is located on the firewall under the ...

Question about 2003 Grand Marquis

1 Answer

Where is the PCM located on a 1995 Mercury Grand Marquis. I am told that if I can give the parts store the numbers off of the unit that they can find me a preprogrammed unit. The mercury dealer said ...

Question about 2000 Grand Marquis

2 Answers

...Hello and welcome to FixYa! I'm suspecting that it's not a fuse issue. It's more like a PCM (power train control module) issue. If the PCM is faulty something will surely fail. First to ...

where do the vss wires go to in the PCM on a grand marquis I want to run new wires from the VSS to the PCM, but I don't know where to hook them up. New wires !!! Don't like the ones you have? ...

...No. If you plan on this, you also need the key, ignition lockset, BCM/GEM, Instrument panel, and PCM. If you want to radio to work, you'll need it also. Not sure, but I believe the years you can ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...