Questions & Answers for: GMC Yukon parking brake

EMERGENCY BRAKE PEDAL GOES DOWN TO THE FLOOR WHEN ENGAGED EMERGENCY BRAKE PEDAL GOES ALL THE WAY TO THE FLOOR WHEN PRESSED sounds like you have a worn set of park break shoes. they are located inside

Where is the fuse block in my 1994 GMC Yukon? I have no brake lights and I can't find the fuse block..-Norm I have no brake lights and I want to check the fuse...-Norm Isn't there a little door on ...

...parking brake cable as well as hydraulics. So have someone pull the parking brake lever on and off, while you watch underneath to see if the cable is releasing correctly. There could be a sticking ...

Truck stuck in park Check if your brake lights are working. If they are not, then the problem is a defective brake light switch (at the top of the brake pedal arm). Most likely, this is your problem. ...

...it to reverse--while depressing the brake pedal--have someone look at the brake lights while you hit the pedal to be sure they are coming on. Is the truck on a hill putting the parking pawl in a

Is there an adjustment for the stop light switch on a 99 GMC Yukon. I have replace it and my brake lights still do not work. Park lights work fine. There is no adjustment. The park lights are on a ...

...and thank you! Your parking light and turn signal/brake lights are actually separate but in the same bulb. 2 elements in one bulb. Replace bulb with the same type and that should solve your

2005 yukon will no go in to park Put foot on brake push shifter all way up. Lol. Seriously of it doesnt go into park your transmission is messed up. Teeth likely broke inside blocking the shift ...

parking brake peddle will not return to the up position. While putting the parking brake on I heard a pop and my parking brake peddle went limp and would not return to the up position. It will come up

Parking brake too soft on my GMC Yukon 2004. I tried adjusting the cable, even tried to ajsut it from the brake shoe side, new brake shoe replaced, disk drum is almost new. Still my paddle is to the ...