Questions & Answers for: Brother HL paper sensor

...paper torn off on a sensor. 2. And I think this is more likley. One of the sensor actuators has fallen off or is stuck causing the sensor to think there is still paper in the machine. Take your time ...

...paper eject sensor is ON, the Drum LED stays ON. (error) ✒ If the lower paper cassette registration sensor is ON, the Ready LED stays ON. (error) If the registration sensor is ON, the lower ...

...paper sensor is bad the machine will stop feeding and output the error paper jam. This is probably the cuase if the paper stops in the same position all the time. Hi b_schmidt_76 this problem occures ...

...is that the unit does not sense the paper. you most likely have a jammed sensor ( take the paper tray out and look inside, see if the sensor tab moves freely and properly) or the sensor itself is

...IF NO PAPER JAM, THERE'S PAPER ON TRAY, UNIT IS CLEAN. THANKS FOR YOUR SUPPORT. Check the Paper Sensor if it is in the Upright position or broken off it will keep asking for paper check that

...paper path a sensor has gone bad or ther eis a small piece of paper still in the path. I would suggest that you go to teh brother site and download the user manul for this model. It will diagram the ...

paper sensor is already dead. Have the white paper sensor replaced by the manufacturer. Hello sir; Pull out paper tray, look inside under the machine, you will find the senser hanging there, make sure

have got press excessively and has got damaged. What to do now?? Try to locate the paper sensor near the rollers that pull the paper through. Remove it and replace with exactly the same specifications

paper wrapper up in paper jam. Unwrap it but when push it on still says PAPER JAM but can't see any paper Along the path that paper travels inside the printer are several sensors, and these sensors ...

...Paper eject sensor is turned ON. If sensors are On, paper is being detected, Off- no paper If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give ...