Question about PIXMA MP830 All-In-One InkJet Printer
...paper jam anywhere. Unable to reset or remove this mesage. A jam sensor may be stuck or have something stuck on it, causing the machine to think it is jammed. These sensors are normally located where ...
paper jam keeps showing paper jam when there is no paper in the feed rollers One of your jam sensors may be stuck in the actuated position by a paper scrap or dust, giving a jam code to your printer. ...
...be one of the paper path sensor is defect or the sensor is dirty( too much paper dust in the sensor) or small piece of paper was pinned in one of the sensor ,check your paper path hope this will ...
paper. There is a sensor associated with the mechanism that you adjust for papersize. This sensor needs to be adjusted to teh the correct paper size. Atypically this sensor is attached to a thumbwheel
Question about imageCLASS MF4150 All-In-One Laser Printer
...is full of paper Your printer problem,Paper sensor,may be its displace or damage,some times paper sensor not sense paper because it was dirty or displace sensor lever.Please check it or replace
Question about PIXMA MP240 All-In-One InkJet Printer
...paper path, normaly you have some sensor stucked. you can check all paper path inside printer, there is a paper door nearby power input. open-it and locate the sensors small plastic finger check for ...
Question about iR 2016i Black and White Copier
Sensor/Wound Paper Jam at Fixing Assembly) 0011-0712 iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i Paper Leading Edge Jam at First Delivery Sensor The first delivery sensor cannot detect presence of
Question about iR 2016i Black and White Copier
...PAPER JAMMED. WILL NOT CLEAR The problem is normally on the exit sensor.Please check the exit sensor if its in the right possition.If the exit sensor is in the right position,also check the ...
paper sensor is skipped.The paper sensor is under the scanner in the middle of printer.If the sensor id broken you need to replace,if the sensor is skipped try to put in the rigth position.Good luck!!
Paper feed sensor in cassette2.Paper feed by pass tray sensor3.Transfer unit sensor4.exit sensor in fuser unit5 Paper exit sensor duplex unitmay be any sensor displace or brokenits openplease check it
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions