Questions & Answers for: Lexmark paper feed does not feed paper

...paper to feed? 1. Turn the printer off and open the access cover. 2. Look for any obstructions in the paper path and remove them if necessary. (It is possible to move the carrier assembly with the ...

Paper feed rolls is rolling over the paper...how to get access to those rolls My paper feed rolls are not clean anymore and would like to clean with 'disolvent'.....but I have no access to them. How ...

feed paper through while printing When try to copy something. The scanner works but the printer always jams or doesn't feed the paper through. I push the paper feed button and the paper comes through,

...paper feed seems to be bad, always get a paper jam message, but the paper starts to feed then hangs up, any fix for this problem out there? how do I get a cracker our of the paper feed? It has jammed ...

Paper feed Paper not feeding correctly; wadding up. The most common factor here is moisture in the paper if it has sat too long. Try just line feeds to see if the transport is at fault or the paper is

...feed the paper in crooked, I think one of the feed wheels is not working. The paper does not feed entirely in when printing. Is it possible to change the rubber on the feed in rollers? check for ...

...PAPER WILL NOT FEED INTO PRINTER PAPER STARTS TO FEED BUT THEN STOPS AFTER SHEET IS MIDWAY THRU...IF I TRY TO ASSIST PAPER BY BY TRYING TO PUSH IT A LITTLE, I GET PAPER JAM INDICATOR ON LCD--BEFORE ...

...FEED PAPER AND PRINTER HEAD MOVES AS PRINTING BUT WILL NOT FEED PAPER WHILE PRINTING? ARE THERE 2 FEEDERS IN THIS PRINTER? HOW TO FIX? transfer roller that starts the paper and feed that feed the ...

...paper feed area) causing the paper to get crooked. It can also be caused by improperly adjusted paper guide or the paper is not in good condition. Paper Feed Rollers Are Rolling But the Paper Is Not ...

...paper in feed tray. We have tried removing and replacing apper still same problem Printer just does not seem to register that there is paper in it The printer hardware should even this out when ...