Questions & Answers for: Brother HL paper feed does not feed paper

...feed The paper will not feed from the paper cassette when it gets below 1/2 full. I can hear the mechanism running trying to pick it up, but all it does is move it up about 1/2 inch from the tray. ...

...paper, and press the Form Feed button. 4. Watch the paper as it feeds through and try to determine where the jam is occurring. 5. Check to see if all the rollers are turning. If all the rollers are ...

...paper feed cartridge, open the printer up and remove all corona wires, and anything that will slide out look to see the feed rollers and try lifting on the rollers with your fingers to take any ...

paper feed stopped working when inserting a replacement carthrige paper feed worked fine until I inserted a new carthridge, HL-2040 brothers printer. After installing then reinstalling when paper feed

...feed the paper, a very strong noise sounds and no paper is feeded Make sure the end tab in the paper tray is not too tight. The tab where you set the paper length. The paper should have about 1/16 ...

...paper feed works but not automatic feed. Brother HL-2140 Laser Printer: Manual paper feed works but not automatic feed. It tries three times then I have an error light. Can I fix it? I've been told ...

...paper won't feed up after you press print, that mean paper is jam... but for this model, you have to make sure the drum unit is clean as dirty drum unit will cause paper not able to feed,.. suggest ...

feed from paper tray, only manual feed. It makes a clicking noise. Toner is newer, definitely not empty. I've tried all the tricks of removing some paper, using different paper, turning the paper over

...paper feed and output method when you want to print on thick paper, labels or envelopes. Open the back cover Open the manual feed slot cover. Using both hands, slide the manual feed slot paper guides ...

...Paper or labels in the MP tray do not consistently feed into the printer. You hear all the movements in the printer and an attempt to pull the sheet in. It usually tries 2 or 3 times and the paper ...