paper feed problem It will not feed the paper into the machine, it reads out of paper, load paper tray. If you feed the paper into it, the machine will eventually take it and print. Check all this----
...Paper Feed Cleaning Kit - Clean the Paper Feed Rollers with the HP Paper Feed Cleaning Kit in Windows XP and 2000 ...
...paper will not feed in order to print. There is no paper jam and still is not feeding properly. I get a message saying out of paper or paper not feeding properly. make sure the input tray is properly ...
Question about COLOUR LASERJET CM4730 F MFP Printer
...feed the paper. If you hear it trying to feed and see the wheels turning, but the paper won't feed, check to see if a screw securing the feed wheel has come loose. If you hear the sound, but nothing ...
Question about Photosmart 2575 All-In-One InkJet Printer
paper on feed, keeps 'saying' paperjam the roller spins but does not 'grab' paper. it's a fairly old unit but, has hardly been used! I have had this problem after printing a large batch of sheets on a
Question about Photosmart 2575 All-In-One InkJet Printer
...feed paper. Says it out of paper Printer will not feed paper. Says there is not any. dosen't even sound like its trying to feed the paper. are the feeder rollers moving? If so, the paper feeder ...
...paper feed system 1) manual feed2) on cassate.When you get a paper jam in cassate you clean paper clauth or cassate feed roller clean.Some times is missfed because it can not creat frashor in ...
...feed Paper won't feed. It sounds like it is trying to feed but does not pull paper through. Got one to feed by holding it up. check at eh back of the paper feed to see the condition of the grey ...
Question about PSC 1610 All-In-One InkJet Printer
...Paper Feed Cleaning Kit software on the computer. Load plain paper in the printer paper tray. Press the Power button to turn the printer off. Press the Power button to turn the printer on. Try ...
Question about Photosmart D110a Wireless E-all-in-one Printer Cn731ab1h
feed Paper will not feed into printer. Have paper in place. Spray a little wd40 in a on a rag and clean the rubber feed tire. Take the dry side of the rag and clean off the roller. Should feed good if
Usually answered in minutes!
2,817 Questions
2,162 Questions
1,869 Questions
1,584 Questions
1,504 Questions