Questions & Answers for: panasonic tv slow

slow-blow 250v fuse. Will this fuse work or do I have to look for the 125v fuse? It will work, the amp rating is most important, 125v / 250v does not matter.......note: if you blow the fuse again, the

Panasonic CT-32SX31 32" TV Won't turn on Replace AC fuse with 6.3 amp slow-blow ( T-6.3 a. )........T.

...Panasonic factory correction...T. I wasn't able to retrieve the fuse from inside the TV, but Radio Shack had replacement 6.3 amp slow-blow fuses and I was able to get one into the receptacle, being a ...

Panasonic TC-21S10M2 TV When I power on, the switching transformer makes a high pitched sound. The noise slows down and stops when the TV is switch off. The capacitor (450V 330uF) & Power Transistor ...

...Panasonic Followed your response recommendations. New 6.3 amp slow blow installed. Works great. Tried the 5 amp fast blow first. This did not work. I hope the slow blow doesn't hurt anything down the ...

...panasonic DLP TV recently is slow to turn on.. flashes red for a long time but eventually will flash green and then come on Replace your Lamp visit Encompass Parts Distr online look up your model ...

Panasonic Plasma TV that has almost similar problem as yours. At times, the response on both TV buttons and remote control is very slow or no response at all. I am pretty sure that this is a defect in

Panasonic TV slow to turn on, works fine after it turns on. My panasonic projection TV is slow to turn on takes a minute or two somtimes. Works great after on. I was wondering if it could be dust I ...

...panasonic tv Well, it depend what Panasonic model you've got. But it looks like a fan error. Basically the fan(s) are either running too slow or not at all. When the TV does its self diagnosis, it ...

Panasonic tv from 2004. I have cable tv, There is an HDMI port on both the TV and the cable box. The stick does not work on either one. when I plug it in and turn on the tv, I get no menu options. The