Questions & Answers for: paddock stand

Ad

Question about 1999 ZX-6R Ninja

1 Answer

...paddock stand seems to be happening again after only about 60 miles. Any ideas wot can be causing this? Your carb are over flowing .a bad float needle could cause this .If it is fuel injection one of ...

Ad

...paddock stand and turned the rear wheel only to find that the chain goes loose and every time a certain part of the back sprocket comes round it all tightens, as it goes passed loosens again. started ...

Ad

Question about 2001 XL 125 V Varadero

1 Answer

no centre stand how do you get wheels off I use a paddock stand. It is so usefull for working on any bike. Keeps the bike upright and stable.

Question about 2001 XL 125 V Varadero

1 Answer

...wont stop That could be the final drive bearing or wheel bearings or even a sticking brake. If you place it on a paddock stand, turn the rear wheel by hand and you will be able to determine the

Question about 2004 GSX-R 600

1 Answer

paddock stands to hold up the bike and is quite simple really just undo the nut think its a 27 or something no need to mess with the calipers when on the stand it will just slip off a bit of grease on

Question about 2004 GSX-R 600

1 Answer

stand-alone handheld sat-nav to do that. You can make a note of the co-ordinates at each corner of the paddock using your phone, and then manually work out the distances and then areas, but an instant

How can I remove rear wheel from Ducati monster 696? Raise the rear of the bike on a single sided paddock stand, undo the big nut on the wheel and slide the wheel off. 

...2000 honda cbr 929 Support the headstock of the bike and use a paddock stand for the rear. then remove the axle from the front wheel. Make sure you have released brake calipers from the front

Need a center stand for a 1989 yamaha FZR1000. Where can I buy one? Centre stand was not factory fitted, must do some modifications to the frame, rather use paddock stand

how to remove the back tire of a suzuki sv 1000 tire shop, paddock stands, loosen the rear tensioners, pull the spindle, take wheel to mechy, buy tire from ebay, musty be cheaper. 5 gbp to change with

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

5914 Answers

Marvin
Marvin

Level 3 Expert

85104 Answers

1400Slugg

Level 2 Expert

260 Answers

Are you a Motorcycles Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...