Questions & Answers for: Dewalt pad orbital sander

pad on random orbital sander dw443 How do you get it apart? You will find usually 3 torx drive screws on the bottom of the tool, remove them and the pad comes off. The replacement pad number is 151416

...pad (C) and the sander body (G). It is designed to increase the dust collection efficiency and control the pad speed while the unit is off the work surface. The disc is designed to be a consumable ...

sand paper pad no longer holds the sanding disk If pad is hook and loop style use compressed air or clean nylon brush to clean debris from hooks.If using adhesive backed dics try wiping a little ...

...orbital sanders regularly while I construct rustic log furniture. After a couple of years of use sanding the curved surfaces of logs, the hook and loop sanding disks no longer adhere to the sanding ...

...Orbital Sander parsimoniously. This tool serves various purposes, just acquire knowledge about it and utilize it to the fullest. Break springs might be bent down or broken. After removed by 3 screws ...

orbital sander keep flying off. If you're using a hook and loop sanding pad (velcro), most likely the hooks have worn out and the pad needs to be replaced. They are available from this website, if you

sander works it just dont have hardly any power just wondering if that was the brushes causing that problem could be but I would think more that there is a bearing that is rough/tight causing, sounds ...

...a Dewalt polisher and want to convert to a sander, you can buy sanding disks to fit your polisher. They are installed on the spindle and I believe you can get a backing pad for it also. Hope that ...

...pad spins at about 20,000 rpm but no longer has the random orbital motion at all? Any suggestions would be appreciated. Thanks in advance for your help. Doug Probably need to replace bearing 6202. I ...

sanding pad ripped off plate on DW421 You can get a new one fairly cheap. Toolpartsdirect.com there is different types to that model. Once you get it, they are not hard to change, 3 or 4 screws.