Questions & Answers for: Hyundai Sonata p0335 ckp sensor

engine light came on and car was stalling and get code p0335 but now running ok you need to have your crank sensor replaced!

...p0335 I know its a crank sensor problem but the vehicle also has a jerking problem such as when you hit the gas pedal it jerks and it also happens once in a while when you hit the brake. I was ...

p0335. I went to change the sensor and noticed the balance shaft belt was snapped so I changed it then put the new sensor in. Still wont turn over so i rescanned and still getting the same error code.

...P0335 and P0732. It has had the cam sensor changed and it helped for a couple of weeks. now no start i sent my solution under clarification request sorry dropped mouse You has cam sensor code and ...

...sensor (CKP)/ engine speed (RPM) sensor --circuit malfunction===causes wiring---CKP/RPM sensor--ECM from your statement of moving coil wires and it temporarily fixed the fault , I suspect wiring ...

...P0335, Crankshaft position sensor. Outside the where there code was checked the car did the same thing it just didn't take that long, it started up after one turn off of the ignition. Would that ...

P0335 Crankshaft position (CKP) sensor - circuit malfunction Possible causes: Wiring, CKP sensor, ECM P0372 Timing reference, high resolution signal A - too few pulses Possible causes: Wiring, CKP/RPM

...P0335 = Crankshaft Position Sensor A Circuit Malfunction This is a sensor used to let the computer know where in the rotation the crankshaft is so it knows when to fire the sparkplugs (among other ...

...to the CKP sensor. Be prepared to replace this sensor P0320....Ignition/Distributor Engine Speed Input Circuit think youm may have a problem with the crank sensor How to cure a problem code ...

...P0335 to P0339 Crank Sensor codes P0190 to P0194 Fuel Pressure Sensor codes No spark due to a bad crank position sensor, a faulty ignition module or PCM, a problem in the ignition circuit (ignition ...